How to Choose and Apply Paint for Melbourne Kitchens and Bathrooms

Kitchens and bathrooms put painted surfaces through frequent cleaning, moisture and everyday wear. Choosing a suitable coating and preparing the surface carefully can help a finish stay presentable for longer. In Melbourne homes, the right approach depends on ventilation, the surface material and how the room is used—not simply the paint colour.

Check the room and existing surface

Before buying paint, look for peeling, cracking, stains, mould or areas where the surface feels chalky. These issues need attention before repainting; applying a fresh coat over loose or contaminated paint can lead to poor adhesion. Identify whether the surface is plasterboard, previously painted masonry, timber or another material, and check that the selected products are suitable for it.

Persistent moisture may point to inadequate ventilation, a leak or another underlying problem. Address the cause before painting. Clean surfaces using a method appropriate to the material, then allow them to dry fully. Avoid painting over active mould; follow appropriate cleaning guidance and seek qualified help if the problem is extensive or keeps returning.

Select a finish for practical use

For walls, a washable low-sheen finish is often a practical choice where splashes and fingerprints are likely. Semi-gloss or gloss coatings can suit trim and doors that need regular wiping, although their sheen may make surface imperfections more noticeable. Ceilings generally benefit https://melbournehousepaintingpros.com.au/exterior-painting/ from a flatter finish to reduce glare.

Use products labelled for the intended room and surface, and follow the manufacturer’s instructions. Bathroom paint can offer better resistance to moisture, but it is not a substitute for effective extraction or adequate drying. In kitchens, consider how close the surface is to cooking splashes and whether it will need frequent cleaning.

Prepare and paint with care

1. Protect benches, fittings and floors, and ventilate the room where practical.
2. Remove loose paint and repair minor defects with compatible materials.
3. Sand as appropriate, remove dust, and apply a suitable primer when the surface or product instructions call for one.
4. Apply the recommended number of coats, observing recoat times and ventilation guidance.

Keep the room in use only as directed on the product label. Paint may feel dry before it has fully cured, so avoid scrubbing or placing items against newly painted surfaces too soon. These steps make interior painting more predictable and help Melbourne homeowners maintain kitchens and bathrooms through daily use.

Melbourne House Painting Pros

2/147 Swan St, Richmond VIC 3121

(03) 4051 5313